SECTION 811 PAINTING AND PROTECTIVE COATINGS
MATERIAL |
REFERENCE |
PURPOSE |
SAMPLED BY |
MINIMUM FREQUENCY |
MIN. QUANTITY |
CERT. |
REMARKS |
|
TESTED BY |
METHOD |
CONTAINER |
DISTR. |
|||||
THIS SECTION IS TO BE USED AS A GUIDE FOR OTHER ITEM NUMBERS WHEN REFERENCE IS MADE TO SECTION 811. THERE ARE NO PAY ITEMS UNDER SECTION 811. |
||||||||
| PAINT AND PROTECTIVE COATINGS | Paint for Field Painting | 811.03 811.11 1008 Mat. Lab |
Accept. | Proj. Engr. S 604 |
1/batch | 500 mL each component Friction top can |
CD* |
(QPL 37 when an organic zinc paint is
required.) Multiple component paints must be submitted in separate containers with the mixing proportions indicated on the sample identification and cans. *Sample when not accompanied by a CD. Sample if questionable. |
| Galvanizing Repair Compound | 811.03(c) 1008.06 Mat. Lab |
Accept. | Proj. Engr. S 601 |
1/type* | 1 bar, can or rod | ---- |
(QPL 23) *Visual inspection by Proj. Engr. Sample only if questionable. |
|
| Paint for Shop Painting | 811.03 811.10 1008 Mat. Lab |
Accept. | Const. Fab. Insp. S 604 |
1/batch | 500 mL each component Friction top can |
CD* |
(QPL 37 when an organic zinc paint
system is required.) Const. Fab. Insp. inspects and lists on report to Proj. Engr. Multiple component paints must be submitted in separate containers with the mixing proportions indicated on the sample identification and cans. Contractor to notify Bridge Design Engineer and Consultant Engineer of the paint system to be used prior to submitting shop drawings. *Sample when not accompanied by a CD. Sample if questionable. |
|